Specialising in water filter and purification systems for the Perth Metro & Western Australian communities. Having over 15 years combined experience, Crystal Water knows quality. Clean, Pure, & Chemical free, the way water should be!
ORDER ONLINE OR CALL US ON: (08) 6244 1300
$ 599.00 – $ 699.00 inc. GST
A water cooler dispenser for the home from Crystal Water will be hugely appreciated by anyone who is in the home and wanting a refreshing drink. It is low cost, flexible and ensures a ready access to the best drinking water.
A water cooler dispenser for the home from Crystal Water will be hugely appreciated by anyone who is in the home and wanting a refreshing drink. It is low cost, flexible and ensures a ready access to the best drinking water. Its presence alone, will actively encourage you and your children to drink more water, and the benefits are considerable and can be far reaching. You simply cannot work or play as well, or feel as good if you are dehydrated. If you and your children are well hydrated, not only will you work and play better as individuals, but also you well feel healthier.
We can normally deliver and install a water cooler dispenser for the home within 24 hours of your order. If a mains water supply is not available, we will set you up with a free scheduled delivery service of purified water bottles, which is usually fortnightly unless you request otherwise – weekly or monthly, for example. If you request an additional delivery, that is no problem. Such requests can also usually be met within 24 hours and is normally free (unlike some suppliers!)
We clean and sanitise the water cooler dispenser and filtration system every twelve months.
Crystal Water offers a range of water cooler dispenser units for the home, which can be directly plumbed into one of our water purification systems.
Top and front panels of the water cooler are moulded of UV treated ABS and side panels are zinc coated steel sheets covered in electrostatically applied high polymer polyester resin.
High gloss cloud white available as standard.
Concealed lift-out design of a high impact durable plastic. Removable for sanitation, it incorporates an anti-splash grid which diverts drain water into the drip tray.
High impact polypropylene lever type. Fast flow and easy to operate. They’re assembled directly onto the reservoir and are fully recessed for added protection. Taps are 177mm above the drain grid allowing ample room for filling kettles and other tall objects. Hot tap has safety influence in the water cooler.
One piece heat resistant plastic. This rust-proof top provides a flat surface to hold small coffee servers and trays.
Crystal Waters unique design. This exclusive device illuminates a green red signal indicating the Power/Cold/Hot position of the water cooler.
Constructed of polypropylene plastic, approximately 12 litres in capacity. The reservoir within the water cooler features large radius corners to facilitate cleaning. The integrated zoned waterway and baffle system prevents ice rings from restricting chilled water flow. Cold water capacity below the baffle is 4.2 litres. Water above the baffle in the water cooler stays at or about room temperature.
Type 304 stainless steel. 500 Watt sheathed heater installed in the tank ensures accurate temperature control. On/Off switch is easily accessible at side of the water cooler cabinet. Tank capacity in the water cooler is 2 litres.
Located on the float assembly of the water cooler for easy access. The air filter contains a replaceable filter disc with a one micron membrane media.
One stage polyethylene float valve system incorporates a primary float valve which maintains the water level in the reservoir of the water cooler and shuts off when full. The system is designed to operate on an incoming water pressure range of 140-700kPa and a pressure limiting valve should be fitted in situations where the mains pressure may fluctuate to greater than 700kpa.
Ozone friendly HFC-134a refrigerant. Flow is controlled by capillary tube which has no moving parts. Condenser is air cooled static type for silent running. No fan assembly is required on the water cooler. Compressor is hermetically sealed, permanently lubricated and protected against motor overload.
Adjustable and user friendly. Readily accessible at the side of the water cooler.
240 Volts 50Hz single phase. A 1.8 metre house cable and 3 pin plug is supplied. Full load current is 1.5 amps.
Tap 1 Outlet water 9DC approx Tap 2 Outlet water 18DC approx Hot Tap Outlet water 88DC approx.
45 x 170ml cups p/hr
150ml Cups/Hr at 10°C
Litres/Hr at 10°C
Cold and Cool: 20kg Hot and Cold: 22kg
Cold and Cool/Hot and Cool: 310mmW x 310mmD x 1040mmH
The entire range of Crystal Water Series of water dispenser,s are covered by a 2 Year Comprehensive Warranty (copy available on request). The warranty provides comprehensive parts and labour coverage, for the period of 2 years from the date of original sale.
For more information on our water dispenser’s, please Click here.
Hot & Cold, Cool & Cold
Only logged in customers who have purchased this product may leave a review.