Waterworks IC8 Remote/Undersink Chiller
The Waterworks IC8 undersink chiller system’s compact, remote chiller is designed for use with drinking fountains, filters, bubblers or glass fillers, thereby enabling any drinking station to supply chilled refreshing water. It can be installed under a sink or bench, in the ceiling, on a column, an adjacent wall, or in a service area. In fact it’s perfect for virtually any single remote outlet at home or in the office and with the addition of optional filtration, it delivers fresh, clean, chilled water at the touch of a button.
The IC8 Undersink Chiller cabinet is constructed of powder coated galvalume which provides the IC8 with an easy clean, corrosion resistant finish.
CHILLING & STORAGE TANK:
Constructed of stainless steel, it has a volume of 1.9 Litres, is fully insulated and independently tested to withstand over 800psi of static pressure. A drain plug and seal is provided, which is removable for servicing. The internal waterlines are 1/4”OD stainless steel and are heliarc welded to eliminate corrosion.
This fan assisted, static condenser system utilises R134a refrigerant which is non toxic, non-flammable and non ozone depleting. Refrigerant flow is controlled by capillary tube, which has no moving parts. The compressor is protected by an automatic overload, is lifetime lubricated and hermetically sealed. The tube on tank style evaporator has six (6) windings around the storage tank for balanced, efficient cooling and the entire system is controlled by an adjustable, (factory preset), thermostat.
The Waterworks IC8 Undersink Chiller is ideally suited to installation within a relatively confined space such as under the kitchen sink. As a refrigeration appliance however, it relies upon air exchange to function properly and therefore must be provided with adequate ventilation. The IC8 is supplied with a 350kPa pressure limiting and dual check valve which must be installed with the unit.
Both the inlet and outlet are recessed, 1/4” stainless steel pipes, suitable for connection to industry standard 1/4” quick connect fittings.
The Waterworks IC8 Undersink Chiller has a 1.5 metre GPO power cable and plug. 240volts, 50Hz. Single phase. Running amps – 0.74A. Power consumption – 120W (Cooling Capacity).
The Waterworks IC8 Undersink Chiller is capable of cooling approximately 8*LPH (litres per hour) at 10°C.
Cooling Speed: From 27°C to 10°C, 21.6 minutes
Cooling Capacity: 8 litres/hour/10°C ± 2°C
Draw Off Capacity: 8 cups below 10°C
*Example of Water Temperature of 150ml cups
Air Temperature, (in immediate vicinity of cooler) 32°C
Inlet water temperature, (immediately prior to cooler inlet) 27°C.
All capacities and performance data is based on the assumption that adequate ventilation has
been supplied to the unit as per the installation instructions.
Ratings are based on intermittent use under environmental conditions of ARI Standard 1010
(self contained, mechanically refrigerated drinking water coolers) and UL399
(drinking water coolers).
210 W x 410 D x 290 H
The Waterworks IC8 Undersink Chiller water coolers are covered by a 1 Year Comprehensive Warranty (copy available on request). The warranty provides comprehensive parts and labour coverage, for the period of 12 months from the date of original sale.